What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
14.06.2025 00:40

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–10[John johnson John Johnson ]
Why are people of mixed race seen as more attractive than non-mixed-race people?
I post the exact comment here.
The other is “what does a “fuse” do?”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
What would explain Trump blaming Ukraine for starting the war with Russia?
The bolt then partially travels down the line to your home.
These are simplified answers to the original question, and does not change anything I wrote above.
[image of Common-mode choke]
Is it sinful for Christians to look at beautiful women?
This is 'the assistant's answer'
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Barnstars:
Why does it matter so much to atheists that God doesn't exist?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Can you share some of your favorite jokes that are not well-known but always make people laugh?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This device then solves the entire problem.
It also is a device that limits the change in current flow.
WhatsApp backs Apple in its legal row with the UK over user data - BBC
Because the load is inductive, the current lags the voltage.(by a bit).
At least they know the answer if they wanted it.
For this case there are devices called Metal oxide varistors (MOV).
Upvotes:
He then describes Rainy Season and Lightning.
These devices are installed between the “hot” and “neutral” and protective ground.
Here’s why exercise is so important if you’re a cancer survivor - The Washington Post
Edit 2024–10.
What is lightning?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
How do you cope when your mother doesn't love you?
the problem then depends on "how fast does the fuse operate?".
A fuse is a non-resetable over current circuit protector.
but I think this circuit , shows a few more pieces.
Why are you a Muslim? Why is it Islam for you and not something else?
A circuit breaker is similar, but is resettable.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
The third is lightning and “how it gets conducted into a home.”
Why didn't people like the Game of Thrones ending?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is where this question deviates from being a 'generic' question, and becomes more specific.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
How do I get over a long-term relationship breakup?
In schematic diagrams this is the symbol for a fuse:
One is “what exactly is in a ‘surge protector’ ? ”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
What does a fuse do?
eight
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
[old diagram got deleted by accident]
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It seems Mohan does not understand the difference between a comment and an Answer.
There are three different concepts here that are getting confused.
An AC voltage/ current source, and an ac inductive load.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
But… the neutral is now “floating” because of the 1 ohm resistance.
a photo is worth a thousand words.
Here is a simplified AC power diagram.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This one hit behind the barn.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
At one ohm, the resistor has a maximum of 1 watt power.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is where the MOV conducts again, and dissipated the energy.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
But it can get overloaded, and no longer works.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
He then describes the function of a fuse.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Now when you have a certain ac resistance, then a current flows in a loop.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
so, what happens?
2024–10–16 [ OO OLAOYE OYEBODE ]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
He then asserts :
First Sentence:
but this device (an Inductor) … impedes the rapid changes in the current.
There are two important concepts here.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
nine
what exactly is a ‘surge’ protector?
(Dc diagram shown, AC is similar).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
One